All Upcoming SSC(Staff Selection Commission) Exams

IES 2024 Exam

User Rating :
4.8 average rating based on 68983 reviews. To view Reviews Click here

About IES Exam

UPSC ESE IES 2023 Notification is out! The conducting authority has announced the UPSC ESE 2022 Interview dates.IES Exam or UPSC ESE exam is a national-level exam conducted by the Union Public Service Commission (UPSC) to recruit engineering graduates. The commission conducts the ESE IES exam each year for major branches, namely Civil, Mechanical, Electrical, and Electronics Telecommunications.

Two stages (Prelims and Mains) of the UPSC ESE exam are offline to shortlist the candidates. The Preliminary exam is an objective paper, while the main is a conventional paper. Candidates who qualify for both Prelims Mains will be eligible to participate in the final round. The last phase of UPSC ESE IES is followed by the interview process, which is the toughest stage due to the higher competition.


IES Exam Date

IES 2023 notification has been released on September 14. IES 2023 exam dates were also released with the notification. Please check below the important dates for IES 2023 exam.

Events Dates Details
Notification 14-Sep-2022 UPSC ESE (IES) 2023 notification will be released online only
Applications 14-Sep-2022 IES 2023 application link will be activated with the release of notification online
Last date to apply  04-Oct-2022 This will be the last date to apply for the UPSC ESE (IES) exam 2023
Application Withdrawal dates to be announced UPSC provided the opportunity to withdraw their applications online
UPSC ESE (IES) 2022 prelims admit card 30-Jan-2023 IES prelims admit card will be released three weeks before the exam date
Preliminary exam 19-Feb-2023 UPSC IES prelims exam will be conducted offline 
UPSC ESE (IES) prelims result 2023 March-2023 (tentative) IES prelims result was released online
UPSC ESE (IES) main 2022 e-admit card 05-Jun-2023 UPSC will release the IES main admit three weeks before the exam date
UPSC ESE (IES) main exam

25-Jun-2023

UPSC will conduct the ESE main exam offline

UPSC ESE (IES) main 2022 result 03-Aug-2023 UPSC ESE (IES) main result will be released online

IES Eligibility

Candidates who want to appear for the UPSC IES Exam 2023 should make sure that they are eligible for the post. The application of candidates can be forfeited at any point of time during the selection procedure if it is found that they do not fulfil the necessary criteria to hold a post in UPSC Engineering Services. 

The eligibility criteria of UPSC IES  2023 includes education qualification, age limit, and nationality has been listed below. 

Educational Requirements:
  • Candidate must have completed his Bachelors in Engineering (B.E) or Bachelors in Technology(B.Tech) from a University that has incorporated by an Act passed by the government of India or other Educational Institutions established by an Act of Parliament or declared to be deemed as Universities by University Grants Commission Act, 1956; or
  • A Degree or Diploma from a foreign University in Engineering recognised by the Government of India; or
  • Candidates should have qualified for the Graduate Membership Examination held after November 1959 of the Institution of Electronics and Radio Engineers, London. 
  • Candidates must have cleared the Institution Examinations of the Institution of Engineers(India) both sections A and B; or
  • Candidates should have passed the Graduate Membership Examination of the Institution of Electronics and Telecommunication Engineers (India); or
  • Should have qualified Parts II and III of the Associate Membership Examination or Sections A and B of the Aeronautical Society of India; or

Age Limit

Candidates must have a minimum age of 21 must not have attained the age of 30 years on January 1, 2022, to appear for this examination.
 

Nationality 

Candidates must be 

  • A citizen of India OR
  • The subject of Nepal OR
  • The subject of Bhutan OR
  • A refugee from Tibet who migrated to India before 1 January 1962
  • People of Indian origin came from Burma, Sri Lanka, Pakistan, Kenya, Zambia, Uganda, Malawi, Zaire, Ethiopia, Tanzania or Vietnam.

All the candidates (apart from Indian citizens) aspiring for a post through the UPSC IES Exam should have a certificate of eligibility issued by the Government of India in their favour.


IES Vacancy

The IES Vacancy branch-wise has been notified in the official notification PDF. The total ESE vacancies for Civil Engineering, Electrical Engineering, Mechanical Engineering, and Electronics Telecommunication Engineering are given in the table provided below:

Branch

Total Vacancy

UPSC ESE CE

327

UPSC ESE ME

UPSC ESE EE

UPSC ESE ECE


IES Syllabus

IES 2023 Syllabus - Prelims

IES prelims exam is equally important for the candidates because the marks secured in it are also considered for the final merit. IES prelims exam is the first stage of the exam process. The list of topics for the UPSC ESE (IES) prelims exam is as follows:

General Studies and Engineering Aptitude Paper

Current issues of national and international importance relating to social, economic and industrial development

Basics of Energy and Environment: Conservation, environmental pollution and degradation, Climate Change, Environmental impact assessment

Engineering Aptitude covering Logical reasoning and Analytical ability

Basics of Project Management

Engineering Mathematics and Numerical Analysis

Basics of Material Science and Engineering

General Principles of Design, Drawing, Importance of Safety

Information and Communication Technologies (ICT) based tools and their applications in Engineering such as networking, e-governance and technology-based education.

Standards and Quality practices in production, construction, maintenance and services

Ethics and values in the engineering profession. 

The Commission has issued a common syllabus for the prelims and main exam (for each engineering branch). The candidates need to prepare all the topics given in the syllabus as that will help in the prelims and main exam. The candidates can see below the important engineering branch-wise syllabus.
 

IES 2023 Syllabus - Main Exam

The candidates should prepare the IES main exam thoroughly because it is a subjective exam where the candidates need to write answers in the 
 

IES Civil Engineering Syllabus 2023

The Commission prescribes the common syllabus for the prelims and main exam. The IES Civil Engineering syllabus is as follows:

IES Civil Engineering (Paper 1) Syllabus

The following are the details of topics and subtopics of the Civil Engineering Syllabus.

Topics Sub-Topics
Building Materials
  • Stone, Lime, Glass, Plastics, Steel, FRP, Ceramics, Aluminum, Fly Ash, Basic Admixtures, Timber, Bricks and Aggregates:
  • Classification, properties and selection criteria;
  • Cement: Types, Composition, Properties, Uses, Specifications and various Tests; Lime & Cement Mortars and Concrete:
  • Properties and various Tests; Design of Concrete Mixes: Proportioning of aggregates and methods of mix design.
Solid Mechanics
  • Elastic constants, Stress, plane stress, Strains, plane strain, Mohr’s circle of stress and strain, Elastic theories of failure, Principal Stresses, Bending, Shear and Torsion.
Structural Analysis
  • Basics of strength of materials, Types of stresses and strains, Bending moments and shear force, concept of bending and shear stresses;
  • Analysis of determinate and indeterminate structures;
  • Trusses, beams, plane frames;
  • Rolling loads, Influence Lines, Unit load method & other methods;
  • Free and Forced vibrations of single degree and multi degree freedom system;
  • Suspended Cables; Concepts and use of Computer Aided Design
Design of Steel Structures Principles of Working Stress methods, Design of tension and compression members, Design of beams and beam column
connections, built-up sections, Girders, Industrial roofs, Principles of Ultimate load design.
Design of Concrete and Masonry structures
  • Limit state design for bending, shear, axial compression and combined forces; Design of beams, Slabs, Lintels,
    Foundations, Retaining walls, Tanks, Staircases;
  • Principles of pre-stressed concrete design including materials and
    methods;
  • Earthquake resistant design of structures;
  • Design of Masonry Structure.
Construction Practice, Planning and Management
  • Construction - Planning, Equipment, Site investigation and Management including Estimation with latest project
    management tools and network analysis for different Types of works;
  • Analysis of Rates of various types of works;
  • Tendering Process and Contract Management, Quality Control, Productivity, Operation Cost;
  • Land acquisition;
  • Labour safety and welfare

The above topics is list of topics as mentioned in the official notification.
 

IES Civil Engineering (Paper 2) Syllabus

The following topics are given for the Civil Engineering Paper 2

Topics Sub-Topics
Flow of Fluids, Hydraulic Machines and Hydro Power

(a) Fluid Mechanics, Open Channel Flow, Pipe Flow:

  • Fluid properties; Dimensional Analysis and Modeling;
  • Fluid dynamics including flow kinematics and measurements; Flow net;
  • Viscosity, Boundary layer and control, Drag, Lift, Principles in open channel flow, Flow controls. Hydraulic jump;
  • Surges;
  • Pipe networks.

(b) Hydraulic Machines and Hydro power -

  • Various pumps, Air vessels, Hydraulic turbines – types, classifications & performance parameters;
  • Power house – classification and layout, storage, pondage, control of supply.
Hydrology and Water Resources Engineering
  • Hydrological cycle, Ground water hydrology, Well hydrology and related data analysis;
  • Streams and their gauging;
  • River morphology;
  • Flood, drought and their management; Capacity of Reservoirs. 
  • Water Resources Engineering: Multipurpose uses of Water, River basins and their potential; Irrigation systems, water
    demand assessment; Resources - storages and their yields;
  • Water logging, canal and drainage design, Gravity dams, falls, weirs, Energy dissipaters, barrage Distribution works, Cross drainage works and head-works and their design;
  • Concepts in canal design, construction & maintenance;
  • River training, measurement and analysis of rainfall.
Environmental Engineering

(a) Water Supply Engineering:

  • Sources, Estimation, quality standards and testing of water and their treatment;
  • Rural, Institutional and industrial water supply;
  • Physical, chemical and biological characteristics and sources of water, Pollutants in water and its effects, Estimation of water demand;
  • Drinking water Standards, Water Treatment Plants, Water distribution networks.

(b) Waste Water Engineering:

  • Planning & design of domestic waste water, sewage collection and disposal; Plumbing Systems. Components and layout
    of sewerage system;
  • Planning & design of Domestic Waste-water disposal system;
  • Sludge management including treatment, disposal and re-use of treated effluents; Industrial waste waters and Effluent Treatment Plants including institutional and industrial sewage management.

(c) Solid Waste Management:

  • Sources & classification of solid wastes along with planning & design of its management system;
  • Disposal system,
  • Beneficial aspects of wastes and Utilization by Civil Engineers.

(d) Air, Noise pollution and Ecology:

  • Concepts & general methodology.
Geo-technical Engineering and Foundation Engineering

(a) Geo-technical Engineering:

Soil exploration - planning & methods, Properties of soil, classification, various tests and inter- relationships; Permeability & Seepage, Compressibility, consolidation and Shearing resistance, Earth pressure theories and stress distribution in soil; Properties and uses of geo-synthetics.

(b) Foundation Engineering:

Types of foundations & selection criteria, bearing capacity, settlement analysis, design and testing of shallow & deep foundations; Slope stability analysis, Earthen embankments, Dams and Earth retaining structures: types, analysis and design, Principles of ground modifications

Surveying and Geology

(a) Surveying:

Classification of surveys, various methodologies, instruments & analysis of measurement of distances, elevation and directions; Field astronomy, Global Positioning System; Map preparation; Photogrammetry; Remote sensing concepts; Survey Layout for culverts, canals, bridges, road/railway alignment and buildings, Setting out of Curves.

(b) Geology:

Basic knowledge of Engineering geology & its application in projects

Transportation Engineering
  • Highways - Planning & construction methodology, Alignment and geometric design; Traffic Surveys and Controls;
  • Principles of Flexible and Rigid pavements design.
  • Tunneling - Alignment, methods of construction, disposal of muck, drainage, lighting and ventilation.
  • Railways Systems – Terminology, Planning, designs and maintenance practices; track modernization.
  • Harbours – Terminology, layouts and planning.
  • Airports – Layout, planning & design.

The above list is exhaustive in nature as provided by the Commission.
 

IES Mechanical Engineering Syllabus 2023

The Commission releases a combined syllabus for all the Engineering streams for prelims and main exam. The candidates can see here the combined syllabus for prelims and main exam.

IES Mechanical Engineering (Paper 1) Syllabus

The candidates can see below the topics of UPSC ESE (IES) syllabus for Mechanical Engineering:

Topics

Sub-Topics

Fluid Mechanics
 

  • Basic Concepts and Properties of Fluids, Manometry, Fluid Statics, Buoyancy, Equations of Motion, Bernoulli’s equation and applications, Viscous flow of incompressible fluids, Laminar and Turbulent flows, Flow through pipes and head losses in pipes.
Thermodynamics and Heat transfer

 
  • Thermodynamic systems and processes; properties of pure substance; Zeroth, First and Second Laws of Thermodynamics;
  • Entropy, Irreversibility and availability; analysis of thermodynamic cycles related to energy conversion: Rankine, Otto, Diesel and Dual Cycles; ideal and real gases; compressibility factor; Gas mixtures.
  • Modes of heat transfer, Steady and unsteady heat conduction, Thermal resistance, Fins, Free and forced convection,
    Correlations for convective heat transfer, Radiative heat transfer – Radiation heat transfer co-efficient; boiling and
    condensation, Heat exchanger performance analysis.
IC Engines, Refrigeration and Air conditioning
  • SI and CI Engines, Engine Systems and Components, Performance characteristics and testing of IC Engines; Fuels; Emissions and Emission Control.
  • Vapour compression refrigeration, Refrigerants and Working cycles, Compressors, Condensers, Evaporators and Expansion devices, Other types of refrigeration systems like Vapour Absorption, Vapour jet, thermo electric and Vortex tube refrigeration.
  • Psychometric properties and processes, Comfort chart, Comfort and industrial air conditioning, Load calculations and Heat pumps.
Turbo Machinery
  • Reciprocating and Rotary pumps, Pelton wheel, Kaplan and Francis Turbines, velocity diagrams, Impulse and Reaction principles, Steam and Gas Turbines, Theory of Jet Propulsion – Pulse jet and Ram Jet Engines,
  • Reciprocating and Rotary Compressors – Theory and Applications
Power Plant Engineering
  • Rankine and Brayton cycles with regeneration and reheat, Fuels and their properties, Flue gas analysis, Boilers, steam turbines and other power plant components like condensers, air ejectors, electrostatic precipitators and cooling towers – their theory and design, types and applications;
Renewable Sources of Energy
  • Solar Radiation, Solar Thermal Energy collection - Flat Plate and focusing collectors their materials and performance.
  • Solar Thermal Energy Storage, Applications – heating, cooling and Power Generation;
  • Solar Photovoltaic Conversion;
  • Harnessing of Wind Energy, Bio-mass and Tidal Energy – Methods and Applications, Working principles of Fuel Cells.

IES Mechanical Engineering (Paper 2) Syllabus

The Mechanical Engineering Paper 2 syllabus as given in the official notification is given below:

Topics Sub-Topics
Engineering Mechanics
  • Analysis of System of Forces, Friction, Centroid and Centre of Gravity, Dynamics; Stresses and Strains-Compound Stresses and Strains, Bending Moment and Shear Force Diagrams, Theory of Bending Stresses- Slope and deflection-Torsion, Thin and thick Cylinders, Spheres.
Engineering Materials
  • Basic Crystallography, Alloys and Phase diagrams, Heat Treatment, Ferrous and Non-Ferrous Metals, Non-metallic materials, Basics of Nano-materials, Mechanical Properties and Testing, Corrosion prevention and control
Mechanisms and Machines
  • Types of Kinematics Pair, Mobility, Inversions, Kinematic Analysis, Velocity and Acceleration Analysis of Planar Mechanisms, CAMs with uniform acceleration and retardation, cycloidal motion, oscillating followers;
  • Vibrations –Free and forced vibration of undamped and damped SDOF systems, Transmissibility Ratio, Vibration Isolation, Critical Speed of Shafts.
  • Gears – Geometry of tooth profiles, Law of gearing, Involute profile, Interference, Helical, Spiral and Worm Gears, Gear Trains- Simple, compound and Epicyclic;
  • Dynamic Analysis – Slider – crank mechanisms, turning moment computations, balancing of Revolving & Reciprocating masses, Gyroscopes –Effect of Gyroscopic couple on automobiles, ships and aircrafts, Governors.
Design of Machine Elements
  • Design for static and dynamic loading;
  • failure theories;
  • fatigue strength and the S-N diagram;
  • Principles of the design of machine elements such as riveted, welded and bolted joints.
  • Shafts, Spur gears, rolling and sliding contact bearings, Brakes and clutches, flywheels.
Manufacturing, Industrial and Maintenance Engineering
  • Metal casting-Metal forming, Metal Joining, Machining and machine tool operations, Limits, fits and tolerances, Metrology and inspection, computer Integrated manufacturing, FMS, Production planning and Control, Inventory control and operations research - CPM-PERT.
  • Failure concepts and characteristics-Reliability, Failure analysis, Machine Vibration, Data acquisition, Fault Detection, Vibration Monitoring, Field Balancing of Rotors, Noise Monitoring, Wear and Debris Analysis, Signature Analysis, NDT Techniques in Condition Monitoring.
Mechatronics and Robotics
  • Microprocessors and Microcontrollers:  Architecture, programming, I/O, Computer interfacing, Programmable logic controller.
  • Sensors and actuators, Piezoelectric accelerometer, Hall effect sensor, Optical Encoder, Resolver, Inductosyn, Pneumatic and Hydraulic actuators, stepper motor, Control Systems- Mathematical modeling of Physical systems, control signals, controllability and observability.
  • Robotics, Robot Classification, Robot Specification, notation; Direct and Inverse Kinematics;
  • Homogeneous Coordinates and Arm Equation of four Axis SCARA Robot.

The above list is exhaustive in nature.
 

IES Electrical Engineering Syllabus 2023

The candidates can see below the combined syllabus for prelims and main exam. 

IES Electrical Engineering (Paper 1) Syllabus

UPSC mentioned all the topics of Electrical Engineering in the ESE (IES) 2023 notification. The list of topics and subtopics is given below:

Topics Subtopics
Engineering Mathematics
  • Matrix theory, Eigen values & Eigen vectors, system of linear equations, Numerical methods for solution of non-linear algebraic equations and differential equations, integral calculus, partial derivatives, maxima and minima, Line, Surface and Volume Integrals.
  • Fourier series, linear, non-linear and partial differential equations, initial and boundary value problems, complex variables, Taylor’s and Laurent’s series, residue theorem, probability and statistics fundamentals, Sampling theorem, random variables, Normal and Poisson distributions, correlation and regression analysis.
Electrical Materials
  • Electrical Engineering Materials, crystal structures and defects, ceramic materials, insulating materials, magnetic materials – basics, properties and applications; ferrities, ferro-magnetic materials and components; basics of solid state physics, conductors; Photo-conductivity; Basics of Nano materials and Superconductors.
Electric Circuits and Fields
  • Circuit elements, network graph, KCL, KVL, Node and Mesh analysis, ideal current and voltage sources, Thevenin’s,
    Norton’s, Superposition and Maximum Power Transfer theorems, transient response of DC and AC networks, Sinusoidal
    steady state analysis, basic filter concepts, two-port networks, three phase circuits, Magnetically coupled circuits, Gauss
    Theorem, electric field and potential due to point, line, plane and spherical charge distributions, Ampere’s and Biot-Savart’s laws; inductance, dielectrics, capacitance; Maxwell’s equations.
Electrical and Electronic Measurements
  • Principles of measurement, accuracy, precision and standards; Bridges and potentiometers; moving coil, moving iron, dynamometer and induction type instruments, measurement of voltage, current, power, energy and power factor, instrument transformers, digital voltmeters and multi-meters, phase, time and frequency measurement, Q-meters, oscilloscopes, potentiometric recorders, error analysis, Basics of sensors, Transducers, basics of data acquisition systems
Computer Fundamentals Number systems, Boolean algebra, arithmetic functions, Basic Architecture, Central Processing Unit, I/O and Memory
Organisation; peripheral devices, data represenation and programming, basics of Operating system and networking, virtual
memory, file systems; Elements of programming languages, typical examples.
Basic Electronics Engineering Basics of Semiconductor diodes and transistors and characteristics, Junction and field effect transistors (BJT, FET and
MOSFETS), different types of transistor amplifiers, equivalent circuits and frequency response; oscillators and other
circuits, feedback amplifiers

IES Electrical Engineering (Paper 2) Syllabus

UPSC mentions the list of topics in the official syllabus as below:

Topics Subtopics
Analog and Digital Electronics
  • Operational amplifiers – characteristics and applications, combinational and sequential logic circuits, multiplexers, multi-vibrators, sample and hold circuits, A/D and D/A  converters, basics of filter circuits and applications, simple active filters;
  • Microprocessor basics- interfaces and applications, basics of linear integrated circuits;
  • Analog communication basics, Modulation and de-modulation, noise and bandwidth, transmitters and receivers, signal to noise ratio, digital communication basics, sampling, quantizing, coding, frequency and time domain multiplexing, power line carrier communication systems.
Systems and Signal Processing
  • Representation of continuous and discrete-time signals, shifting and scaling operations, linear, time-invariant and causal systems, Fourier series representation of continuous periodic signals, sampling theorem, Fourier and Laplace transforms, Z transforms, Discrete Fourier transform, FFT, linear convolution, discrete cosine transform, FIR filter, IIR filter, bilinear transformation.
Control Systems
  • Principles of feedback, transfer function, block diagrams and signal flow graphs, steady-state errors, transforms and their applications; Routh-hurwitz criterion, Nyquist techniques, Bode plots, root loci, lag, lead and lead-lag compensation, stability analysis, transient and frequency response analysis, state space model, state transition matrix, controllability and observability, linear state variable feedback, PID and industrial controllers
Electrical Machines
  • Single phase transformers, three-phase transformers - connections, parallel operation, auto-transformer, energy conversion principles, DC machines - types, windings, generator characteristics, armature reaction and commutation, starting and speed control of motors, Induction motors - principles, types, performance characteristics, starting and speed control, Synchronous machines - performance, regulation, parallel operation of generators, motor starting, characteristics and applications, servo and stepper motors.
Power Systems Basic power generation concepts, steam, gas and water turbines, transmission line models and performance, cable
performance, insulation, corona and radio interference, power factor correction, symmetrical components, fault analysis,
principles of protection systems, basics of solid state relays and digital protection; Circuit breakers, Radial and ring-main
distribution systems, Matrix representation of power systems, load flow analysis, voltage control and economic operation,
System stability concepts, Swing curves and equal area criterion. HVDC transmission and FACTS concepts, Concepts of
power system dynamics, distributed generation, solar and wind power, smart grid concepts, environmental implications,
fundamentals of power economics.
Power Electronics and Drives Semiconductor power diodes, transistors, thyristors, triacs, GTOs, MOSFETs and IGBTs - static characteristics and principles of operation, triggering circuits, phase control rectifiers, bridge converters - fully controlled and half controlled, principles of choppers and inverters, basis concepts of adjustable speed DC and AC drives, DC-DC switched mode  converters, DC-AC switched mode converters, resonant converters, high frequency inductors and transformers, power supplies.

IES Electronics & Telecommunication Engineering Syllabus 2023

IES Syllabus for Electronics and Telecommunication Engineering is given below:

IES Electronics & Telecommunication Engineering (Paper 1) Syllabus

The candidates can see below list of topics and subtopics for Electronics & Telecommunication Engineering 

Topics

Subtopics

Basic Electronics Engineering
  • Basics of semiconductors;
  • Diode/Transistor basics and characteristics;
  • Diodes for different uses;
  • Junction & Field Effect Transistors (BJTs, JFETs, MOSFETs);
  • Transistor amplifiers of different types, oscillators and other circuits; Basics of Integrated Circuits (ICs);
  • Bipolar, MOS and CMOS ICs; Basics of linear ICs, operational amplifiers and their applications-linear/non-linear;
  • Optical sources/detectors;
  • Basics of Optoelectronics and its applications
Basic Electrical Engineering
  • DC circuits-Ohm’s & Kirchoff’s laws, mesh and nodal analysis, circuit theorems;
  • Electro-magnetism, Faraday’s & Lenz’s
    laws, induced EMF and its uses;
  • Single-phase AC circuits;
  • Transformers, efficiency;
  • Basics-DC machines, induction machines, and synchronous machines; Electrical power sources- basics: hydroelectric, thermal, nuclear, wind, solar;
  • Basics of batteries and their uses.
Materials Science
  • Electrical Engineering materials;
  • Crystal structure & defects;
  • Ceramic materials-structures, composites, processing and uses;
  • Insulating laminates for electronics, structures, properties and uses;
  • Magnetic materials, basics, classification, ferrites, ferro/para-magnetic materials and components;
  • Nano materials-basics, preparation, purification, sintering, nano particles and uses;
  • Nano-optical/magnetic/electronic materials and uses;
  • Superconductivity, uses.
Electronic Measurements and Instrumentation
  • Principles of measurement, accuracy, precision and standards;
  • Analog and Digital systems for measurement, measuring instruments for different applications; Static/dynamic characteristics of measurement systems, errors, statistical analysis and curve fitting;
  • Measurement systems for non-electrical quantities;
  • Basics of telemetry; Different types of transducers and displays; Data acquisition system basics.
Network Theory
  • Network graphs & matrices;
  • Wye-Delta transformation;
  • Linear constant coefficient differential equations- time domain analysis of RLC circuits;
  • Solution of network equations using Laplace transforms- frequency domain analysis of RLC circuits; 2-port network parameters-driving point & transfer functions; State equations for networks; Steady state sinusoidal analysis.
Analog and Digital Circuits
  • Small signal equivalent circuits of diodes, BJTS and FETs;
  • Diode circuits for different uses;
  • Biasing & stability of BJT & JFET amplifier circuits;
  • Analysis/design of amplifier- single/multi-stage; Feedback& uses; Active filters, timers, multipliers, wave shaping, A/D-D/A converters;
  • Boolean Algebra& uses;
  • Logic gates, Digital IC families, Combinatorial/sequential circuits;
  • Basics of multiplexers, counters/registers/ memories /microprocessors, design& applications

The above list includes all the topics as mentioned in the official notification

IES Electronics & Telecommunication Engineering (Paper 2) Syllabus

The UPSC IES Electronics and Telecommunication Engineering syllabus is summarised below:

Topics Subtopics
Analog and Digital Communication Systems
  • Random signals, noise, probability theory, information theory; Analog versus digital communication & applications:
  • Systems- AM, FM, transmitters/receivers, theory/practice/ standards, SNR comparison;
  • Digital communication basics:
  • Sampling, quantizing, coding, PCM, DPCM, multiplexing-audio/video; Digital modulation:
  • ASK, FSK, PSK; Multiple access:
  • TDMA, FDMA, CDMA; Optical communication: fibre optics, theory, practice/standards.
Control Systems
  • Classification of signals and systems;
  • Application of signal and system theory;
  • System realization; Transforms& their applications;
  • Signal flow graphs, Routh-Hurwitz criteria, root loci, Nyquist/Bode plots;
  • Feedback systems-open &close loop types, stability analysis, steady state, transient and frequency response analysis;
  • Design of control systems, compensators, elements of lead/lag compensation, PID and industrial controllers
Computer Organization and Architecture
  • Basic architecture, CPU, I/O organisation, memory organisation, peripheral devices, trends;
  • Hardware /software issues;
  • Data representation& Programming;
  • Operating systems-basics, processes, characteristics, applications; Memory management, virtual memory, file systems, protection & security;
  • Data bases, different types, characteristics and design;
  • Transactions and concurrency control; Elements of programming languages, typical examples.
Electro Magnetics
  • Elements of vector calculus, Maxwell’s equations-basic concepts; Gauss’, Stokes’ theorems; Wave propagation through different media;
  • Transmission Lines-different types, basics, Smith’s chart, impedance matching/transformation, S-parameters, pulse excitation, uses;
  • Waveguides-basics, rectangular types, modes, cut-off frequency, dispersion, dielectric types;
  • Antennas-radiation pattern, monopoles/dipoles, gain, arrays-active/passive, theory, uses.
Advanced Electronics Topics
  • VLSI technology: Processing, lithography, interconnects, packaging, testing;
  • VLSI design: Principles, MUX/ROM/PLA-based design, Moore & Mealy circuit design;
  • Pipeline concepts & functions;
  • Design for testability, examples; DSP: Discrete time signals/systems, uses;
  • Digital filters: FIR/IIR types, design, speech/audio/radar signal processing uses;
  • Microprocessors & microcontrollers, basics, interrupts, DMA, instruction sets, interfacing;
  • Controllers & uses; Embedded systems.
Advanced Communication Topics
  • Communication networks: Principles /practices /technologies /uses /OSI model/security;
  • Basic packet multiplexed streams/scheduling;
  • Cellular networks, types, analysis, protocols (TCP/TCPIP); Microwave & satellite communication: Terrestrial/space type LOS systems, block schematics link calculations, system design;
  • Communication satellites, orbits, characteristics, systems, uses; Fibre-optic communication systems, block schematics, link calculations, system design.

IES Exam Pattern

Prelims Exam Pattern

Stage 1 of the IES examination has 2 papers. Take a look below at IES 2023 preliminary exam pattern

Subject

Duration

Maximum Marks

Category-I Civil Engineering

Paper-I (General Studies and Engineering Aptitude)

2 hrs.

200

Paper-II (Civil Engineering)

3 hrs.

300

Total

500

 

 Subject

Duration

Maximum Marks

Category-II Mechanical Engineering

Paper-I (General Studies and Engineering Aptitude)

2 hrs.

200

Paper-II (Mechanical Engineering)

3 hrs.

300

Total

500

 

 Subject

Duration

Maximum Marks

Category-III Electrical Engineering

Paper-I (General Studies and Engineering Aptitude)

2 hrs.

200

Paper-II (Electrical Engineering)

3 hrs.

300

Total

500

 

Subject

Duration

Maximum Marks

Category-IV Electronics and Telecommunication Engineering

Paper-I (General Studies and Engineering Aptitude)

2 hrs.

200

 Paper-II (Electronics and Telecommunication Engineering)

3 hrs.

300

Total

500


Negative Marking in UPSC ESE (IES) 2023 Prelims Exam

There is a provision of negative marking in the USPC ESE (IES) prelims exam as per the following.

Marks assigned for correct answer Marks to be deducted for incorrect answer
2 Marks 0.66

Main Exam Pattern

Stage 2 of the IES examination has 2 papers. Take a look below at IES 2023 main exam pattern

 Subject

Duration

Maximum Marks

Category-I Civil Engineering

Paper-I ( Civil Engineering)

3 hrs.

300

Paper-II (Civil Engineering)

3 hrs.

300

Total

600

 

 Subject

Duration

Maximum Marks

Category-II Mechanical Engineering

Paper-I ( Mechanical Engineering )

3 hrs.

300

Paper-II (Mechanical Engineering)

3 hrs.

300

Total

600

 

Subject

Duration

Maximum Marks

Category-III Electrical Engineering

Paper-I ( Electrical Engineering )

3 hrs.

300

Paper-II (Electrical Engineering)

3 hrs.

300

Total 

600

 

Subject

Duration

Maximum Marks

Category-IV Electronics and Telecommunication Engineering

Paper-I ( Electronics and Telecommunication Engineering `)

3 hrs.

300

Paper-II (Electronics and Telecommunication Engineering)

3 hrs.

300

Total

600


IES How to Apply

  1. Visit UPSC recruitment website at upsc.gov.in
  2. Click on the online recruitment link for UPSC Examinations. You will be directed to a new page.
  3. Click on ‘Click here for Part-I’ next to the Engineering Services (Preliminary / Stage I) Examination column.
  4. A new page with the necessary instructions to fill the form will appear. Read the instructions carefully and then click on ‘Yes’. A new page will appear.
  5. Enter the details that have been asked and upload the necessary documents.
  6. Click on ‘Submit’ and repeat the same process for Part-II registration. It is necessary that candidates fill both the Part I and Part II form. Only then the registration of the candidate will be completed.
  7. Candidates should then move on to pay the application fee.
  8. Once the application fee is paid, the application of the candidate will appear on the screen. He/she can download it for future reference.

Application Fee

Candidates are required to pay UPSC IES application fee of INR 200. Female candidates and candidates belonging to Scheduled Castes, Scheduled Tribes, and Persons with Disability are exempted from paying any fee.


Other Related Upcoming SSC(Staff Selection Commission) Exams

Frequently Asked Questions (FAQ) IES Exam

Q. What is the Syllabus of IES Exam?
A. In this article Page, we have provided the latest syllabus of the IES exam. The syllabus of IES comprises the topics and sub-topics under sections, Knowledge of IES syllabus helps candidates to focus on their preparation and important areas of each subject.
Q. What is pattern of IES Exam?
A. In this article Page, we have provided the latest exam pattern of the IES exam . The pattern of comprises the subject wise pattern and no. of questions will come in exam, go to our article section of exam pattern for more details.
Q. Which is the best Mock test series for the IES Exam?
A. At Studyclap, candidates can practice a complete set of Mock Test Series, along with a free mock test designed by our well qualified and expert faculty Team.
Q. How to prepare for the IES Exam?
A. To prepare for IES exam, candidates should go through the exam syllabus and exam pattern, solve mock tests, practice previous years' question papers. Try to clear the concepts of each and every topic rather than cramming. Set a time to go over the chapters, Differentiate weak areas and work to improve them. Solve puzzles to improve logical skill.
Q. How to Download IES Exam Syllabus PDF?
A. Candidates can download IES exam syllabus PDF from our website for free. Candidates need to only register with us to download the exam syllabus.

Reviews IES